Breaching multi-tools

*Contact Cadex prior to purchase for more information on recommended use*

The Cadex telescopic tactical breaching multi-tool is one of the most powerful breaching tools available. A combination of the breaching hammer, Halligan tool, hinge breaker and expedient ram. The Cadex tactical breaching multi-tool provides superior capabilities over traditional single-use tools. Recently upgraded after ten years of service, the improved TBH allows users to adapt their equipment to the mission at hand.

Features

  • Its unique design incorporates the functionality of multiple tools, in a simple package. Rather carry one or carry five?
  • Its telescopic design makes it very compact to carry. It can be used collapsed or extended.
  • Can be interchanged between the hinge breaker or the optional “brake and rake”.
  • CQB Tactical Breaching Hammer also available (P/N: 580-A009) for use in restricted confines or as a secondary team tool.
Optional "Break & Rake" tip (Part#: 580-A001)
Sling and QD sling mount included

For more information, please refer to our Catalog (pdf-format or flipbook), or contact us at customerservice@cadexinc.com

Specifications

TBH

Part#: 580-A005 (NSN#: 5120-20-008-4801)
Dimensions: 9″ x 2.5″ x 23″ | 22.86 x 6.35 x 58.42 cm
Extended: 33.12″ | 84.13 cm
Weight (±) : 16.83 lbs | 7636 grams
Material Alloy steel and aluminum

CQB

Part#: 580-A009
Dimensions:9″ x 2.5″ x 16.24″ | 22.86 x 6.35 x 41.27 cm
Extended:22.24″ | 56.51 cm
Weight (±) :12.14 lbs | 5507 grams
MaterialAlloy steel and aluminum

Optional Items

Brake and Rake Tip

(Part#: 580-A001)
Dimensions:9.395″ x 5.375″ x 3.25″ (23.86 x 13.65 x 8.25 cm)
Weight (±) :3.69 lbs (1674 grams)
MaterialAlloy steel and aluminum

Halligan bars

The Cadex Titanium Halligan Bars (24″ or 30″) are the ultimate breaching tools available in the breacher’s arsenal. You can pry, twist, rip or smash doors, frames, drywall and basically any piece of wood that gets in your way. The weight saving is tremendous, as titanium is about half the weight of steel that would normally be used on similar tools, without compromising its wielding power.

Features & specifications

  • High strength, titanium alloy, one piece integrally cast octagonal shaft and ends.
  • 56% lighter than steel.
  • Rust-free and corrosion-resistant to many chemicals and salt water.
  • Low conductivity.

Titanium Halligan Bar 24"

(Part#: 580-089)
Dimensions:6.87″ x 6.75″ x 24″(17.45 x 17.15 x 60.96 cm)
Weight (±) :5.1 lbs | 2313 grams
MaterialTitanium alloy

Titanium Halligan Bar 30"

(Part#: 580-088)
Dimensions:6.87″ x 6.75″ x 30″ (17.45 x 17.15 x 76.2 cm)
Weight (±) :5.9 lbs | 2676 grams
MaterialTitanium alloy