Strike Nuke Evo
The Cadex Strike Nuke Evo micro-chassis system is designed for shooters looking for traditional stock ergonomics while benefiting from the advantages of a chassis system. Gen2 improved design with M-LOK technology and high density fiberglass reinforced polymer. The Strike Nuke Evo stock fits the CDX-SS SEVEN S.T.A.R.S., the CDX-R7 Series actions, most Rem 700 custom action clones and some Tikka® models.
SHORT/LONG ACTION
| Dimensions: | 31.97″ x 2.14″ x 6.95″ (81.2 x 5.44 x 17.65 cm) |
| Weight (±) : | 5.1 lbs (2313 grams) |
Shown with optional M-LOK NVD rail system
For any Defiance Machine® or Rem 700 Custom Clones, contact Cadex to validate compatibility prior to order.
For more information, please refer to our Catalog (pdf-format or flipbook), or contact us at customerservice@cadexinc.com
Black (BLK)
Tan (Tan)
O.D. Green (ODG)
Stealth Shadow Vortex (SSV)
Sniper Grey (GRY)
Stormtrooper White (WHT)
Burnt Bronze (BRZ)
Hunter Orange (ORG)
Robin's Egg Blue (EGG)
NRA Blue (NRA)
USMC red (RED)
- Adjustable recoil pad height.
- ¼” spacer included. Optional additional spacers available to increase the length of pull.
- Tool-free spring loaded up and down cheek piece adjustment. Side to side adjustable. Includes a neoprene cheek pad.
- Built-in flush cups for QD sling attachment (both sides).
- Optional monopod rail or bean bag riders.
- Optimized grip angle with comfortable thumb rest.
- Oversized trigger guard and magazine release for easy manipulation with gloves.
- Reinforced polymer trigger guard.
- AICS magazine compatible.
- Fits Cadex CDX-R7, CDX-SS SEVEN S.T.A.R.S., Rem 700, custom clones and Tikka T3(x) / T3(x) CTR.
- Optional M-LOK bipod/sling adaptor.
- Optional M-LOK 3.5″ aluminum bipod rail.
- Optional M-LOK 3″ modular rail or M-LOK flush cup adaptor.
- Ergonomic semi wide fore-end tube with medium and heavy barrel contour inserts.
- Maximum barrel diameter 1.350″ straight taper to 1.250″ at muzzle end.
Click to see the barrel contour dimensions
From the lower receiver to the fore-end tube end: approx. 8.5″ where indicated by the blue arrow. Maximum barrel diameter: 0.770″ – 0.950″
Provides a stable platform that eliminates any movement of the action in the micro-chassis. No bedding required.
The butt pad can be adjusted 1/2″ up or down.
Optional spacers can be added for a longer length of pull.
(Sold in kit of 3 pcs.)
Click to see the technical document
The cheek rest is adjustable up and down (total travel of 1 inch), right and left (total travel of 5/16 inches), plus in angle for a perfect alignment with the rifle scope eyepiece.
Built-in flush cups on both sides.
Multiple bipod rail positioning.
Ambidextrous palm swell comfortable thumb rest.
Oversized trigger guard and magazine release for easy manipulation with gloves.
* Other platforms & calibers are available upon request.
* Cadex chassis does not include any magazine. Magazines must be ordered separately.
FAQ
Question : Will a Defiance Machine Classic action fit the Cadex Strike Nuke Evo chassis in a short action Remington 700 configuration, and is a special recoil lug required?
Answer : Yes, a Defiance Machine Classic action is compatible with the Cadex Strike Nuke Evo chassis in the short action Remington 700 configuration.
The Strike Nuke Evo chassis is designed to accept compatible Remington 700 short action footprint actions, and the Defiance Machine Classic action fits this configuration. A special recoil lug is not typically required for this setup, provided the action uses a standard recoil lug configuration compatible with the chassis inlet.
Question : Can an ARCA rail be added to the Cadex Strike Nuke Evo chassis for tripod mounting while keeping a Picatinny rail for a bipod?
Answer : Yes. For this type of setup, the recommended option is the AES Picatinny Rail Kit, part #AES-PRK430.
This kit provides a full-length ARCA rail for tripod mounting and includes an ARCA clamp with a Picatinny rail underneath. This allows the user to mount the rifle on a tripod using the ARCA interface while still keeping a Picatinny attachment point available for a bipod.
Question : Is the Cadex Strike Nuke Evo chassis compatible with trigger hangers?
Answer : Yes, the Cadex Strike Nuke Evo chassis can be compatible with some trigger hanger configurations.
However, compatibility may vary depending on the specific action and trigger hanger design. Some trigger hangers will fit without issue, while others may require a minor front-end clearance modification to fit properly within the chassis.
Question : Will a Tikka CTR chambered in .308 Win fit the Cadex Strike Nuke Evo chassis?
Answer : Yes, a Tikka CTR chambered in .308 Win is compatible with the Cadex Strike Nuke Evo chassis.
The Tikka CTR uses the Tikka T3/T3x action pattern, which is supported by the Strike Nuke Evo chassis when ordered in the proper Tikka configuration. This makes the Strike Nuke Evo a suitable chassis option for Tikka CTR owners looking to upgrade their rifle platform.
Question : Will a Remington 700 chambered in .300 Win Mag fit the Cadex Strike Nuke Evo Long Action chassis, and which magazine should be used?
Answer : Yes, a Remington 700 chambered in .300 Win Mag can be compatible with the Cadex Strike Nuke Evo Long Action chassis when ordered in the proper Remington 700 long action configuration.
The Strike Nuke Evo Long Action chassis comes with three magazine spacers: 3.715″, 3.775″, and 3.850″. These spacers are designed for Single Stack Single Feed, or SSSF, AICS-pattern magazines.
Question : Will the Cadex Strike Nuke Evo Long Action chassis fit a Defiance Machine anTi-X long action for a .300 PRC rifle build?
Answer : Yes, the Cadex Strike Nuke Evo in the Remington 700 Long Action configuration is compatible with a Defiance Machine anTi-X long action.
This setup can be used for long action rifle builds such as .300 PRC, provided the rifle components are selected around the appropriate action footprint, magazine length, and cartridge overall length requirements.
The Strike Nuke Evo Long Action chassis comes with three magazine blocks, allowing the use of 3.715″, 3.775″, and 3.850″ magazine lengths. The correct magazine length depends on the action cut, magazine setup, and ammunition configuration.
Question : Will a Bergara B-14 chambered in .300 PRC fit the Cadex Strike Nuke Evo Long Action chassis, and can it use 3.850″ AICS CIP-length magazines?
Answer : Yes, a Bergara B-14 chambered in .300 PRC can be used with the Cadex Strike Nuke Evo Long Action chassis when ordered in the proper long action configuration.
The Strike Nuke Evo Long Action chassis comes with three magazine spacers, including the spacer required for 3.850″ magazine length. This allows the use of 3.850″ AICS-pattern CIP-length magazines, which are commonly used for cartridges such as .300 PRC.