Strike pro
The Strike Pro is the ultimate chassis for professional PRS shooters as well as for amateurs competing at regional matches. The Strike Pro combines all features needed for positional shooting games where every second matters. This competition chassis features a 17″ long built-in Arca Elite System (AES) rail, 10 M-LOK mounting slots at 3, 6 and 9 o’clock, a barricade stop, our PRO folding tool-free adjustable rear stock, a multi-position adjustable trigger guard, tunable height ambidextrous extended magazine latch and rubberized vertical grip. Popular optional items such as M-LOK weights, full length night vision bridge and PRO handguard can be purchased separately.
Short Action
| Dimensions: | 37.95″ x 2.21″ x 7.03″ (96.39 x 5.61 x 17.86 cm) |
| Dimensions (Folded): | 28.15″ x 4.29″ x 7.03″(71.50 x 10.89 x 17.86 cm) |
| Weight (±) : | 4.15 lbs (1882 grams) |
PRO RIMFIRE 22LR
MAGAZINE SLEEVE INCLUDED
(#03127-2003-K1)
Fore-end with built-in Arca Elite System (AES) – Bottom view
Optional buttstock bracket for M-LOK weights (#03127-2076-K1).
Weights not included
For more information, please refer to our Catalog (pdf-format or flipbook), or contact us at customerservice@cadexinc.com
Black (BLK)
Tan (Tan)
O.D. Green (ODG)
Stealth Shadow Vortex (SSV)
Sniper Grey (GRY)
Stormtrooper White (WHT)
Burnt Bronze (BRZ)
Hunter Orange (ORG)
Robin's Egg Blue (EGG)
NRA Blue (NRA)
USMC red (RED)
- PRO tool-free fully adjustable stock for length of pull, cheek piece and recoil pad height. Includes a neoprene cheek pad.
- Monopod rail or optional bean bag riders.
- Adjustable folding hinge with offset cam to remove any possible free play.
- Cadex vertical rubberized grip with forward/ rearward adjustable trigger guard.
- Right/left thumb rest kit.
- Ambidextrous extended mag release.
- Adjustable height magazine latch for cartridge feeding fine-tuning.
- Compatible with AICS pattern magazines or AW models if your action is AW compatible. Polymer funnel magwell for faster mag change.
- Right handed, short action calibers only.
- Fits the Cadex CDX-SS SEVEN S.T.A.R.S., CDX-R7 series, all Rem 700 and most custom clone actions. Only available in short action calibers.
- Ultra rigid one-piece monoblock lower receiver and fore-end made out of an aluminum billet.
- Built-in barricade stop.
- 10 M-LOK slots at 3, 6 and 9 o’clock.
- Fully open top chassis. Optional 20 MOA full length PRO NVD bridge available (not shown).
- 17″ fore-end with built-in Arca Elite System (AES). Minimum flex fore-end, capable to secure up to 5.84 lb of optional weights, for minimized recoil, optimum balance and rigidity.
- Fits up to 1.250″ diameter straight barrels.
- Optional PRO handguard for mirage reduction and better front hand grip.
From the lower receiver to the fore-end tube end : approx. 18″ where indicated by the blue arrow. Maximum barrel diameter: 1.250″
Reverse folding butt stock offers bolt handle protection and ultra compact transport.
Rattle free locking mechanism. Easy manipulation with gloves.
Offset cam to remove any free play.
Finger grooved rubberized Ergo grip.
Oversized trigger guard and magazine release for easy manipulation with gloves.
* Other platforms & calibers are available upon request.
* Cadex chassis does not include any magazine. Magazines must be ordered separately.
Compatible optional accessories
FAQ
Question : Will a Zermatt Origin action fit the Cadex Strike Pro chassis?
Answer : The Cadex Strike Pro chassis is designed to fit most Remington 700 footprint actions, and the Zermatt Origin action may be compatible if it follows a true Remington 700 footprint.
However, this specific action has not been test-fitted in-house by Cadex. The main point to verify is whether the action dimensions match a true Remington 700 footprint, especially around the rear tang area. Some actions are marketed as Remington 700 footprint actions but may be slightly longer or wider in certain areas, which can affect chassis fitment.
If the action uses a trigger hanger, minor fitting may also be required to ensure proper clearance.
Question : Where are the QD sling attachment points located on the Cadex Strike Pro chassis?
Answer : The Cadex Strike Pro chassis includes multiple QD sling attachment points.
There are two QD sling attachment points located on the bottom of the Pro buttstock, as well as one QD sling attachment point on the hinge side of the chassis.
At the front of the chassis, users can also add an M-LOK QD sling socket if an additional forward sling attachment point is required. This allows the Strike Pro chassis to support different sling mounting configurations depending on user preference and setup.
Question : What is the length of pull range on the Cadex Strike Pro chassis?
Answer : The Cadex Strike Pro chassis has an adjustable length of pull range from 13-1/4 inches to 14-3/4 inches, measured from the trigger shoe.
Additional length of pull adjustment can be achieved using 1/4-inch spacers, allowing users to fine-tune the stock fit based on their shooting position, body size, and personal preference.